In Western Australia, the design, construction and installation of private swimming and spa pools and their safety barriers is subject to strict building requirements. The Building Regulations 2012 (the Regulations) requires all private swimming and spa pools that contain water that is more than 300mm deep to have a compliant safety barrier installed that restricts access by young children to the pool and its immediate surrounds. In Western Australia, there are two sets of safety barrier requirements depending on when the private swimming pool was installed or when plans for the installation of the pool were submitted to the permit authority for approval. Generally Speaking: Post 1 May 2016 private swimming pools are required to have safety barriers that comply with the edition of the Building Code of Australia (BCA) currently in effect. The BCA references AS 1926.1:2012 (Safety barriers for swimming pools) and AS 1926.2:2007 (Location of safety barriers for swimming pools) incorporating amendments 1 and 2; Pre 1 May 2016 private swimming pools can continue to comply with their existing requirements under the Regulations or alternatively comply with the new requirements (that is the BCA). Security Doors Around Private Swimming and Spa Pools Doors that form part of the pool barrier must have the following characteristics: be fitted with a self-closing device that will automatically return the door to the closed position. It must allow the self-latching device to operate without the application of manual force from any position that the door is capable of opening, including when resting on the latch; be fitted with a self-latching device that will prevent the door from being re-opened without the application of manual force on the latch release mechanism; the operating part of the latch release mechanism must not be less than 1500 mm above the floor; Rules For Pools and Spas You can get more detailed information from the Government of Western Australia, Department of Commerce, Building Commission . Bonds Security Products have many years of experience installing pool compliant safety barrier doors and window screens. Speak to your local council or organisation responsible for inspecting your pool safety. They will provide you with a list of requirements. Bonds Security Products can then manufacture and install the items required to pass the inspection. Bonds Security Products do not conduct the inspection process.

Many customers mistakenly believe that security doors and screens, because of their tough construction, don’t require any regular maintenance – but it’s not true. Regular maintenance will extend the life of your security door and ensure it is in perfect working order in the event that it is tested by a potential intruder. Three Easy Maintenance Tasks You Can Do Yourself It only takes a little care to extend the life of your security product. We recommend you take the following three actions regularly: 1. Washing and Cleaning Your security doors and screens are exposed to the elements and will quickly pick up dirt, salt deposits, and pollutants. This residue can damage the appearance of the door, and, if left unchecked, may also reduce its functionality. Cleaning is simple: Use a wet sponge to remove loose deposits. Use a brush and mild detergent to remove any other material. Wash with clean water until no detergent is left We recommend most customers clean once every three months. If you live within 10km of the coast, increase the frequency to once a month (or more) as needed – being near the sea will increase the amount of damaging salt that builds up. The frequency with which you need to clean may differ from these guidelines – use your own judgement and aim to keep the door as clean as possible. 2. Lock Lubrication After cleaning, lubricate the locks on your security doors; we recommend using INOX for this (you can purchase this from us or your local hardware store). Simply move the lock through its different positions while applying the lubricant. This should be done even if the lock is working perfectly. 3. Inspection Finally, inspect the door for damage or any signs that someone might have tried to force entry. Check that the door opens and closes correctly and smoothly and that the lock works. Performing these basic general maintenance tasks is a prerequisite for your warranty; it may be void if they are not performed regularly. When To Arrange a Service Call We recommend regular service visits (normally once-yearly) to ensure your security doors are in full working order. Additionally, you should arrange for an immediate service visit in the following situations: Book a Service Call if you notice a problem with your door; even small issues can impact the level of security your door provides, especially if left to get worse. Book a Service Call if you believe an attempt has been made to break into your property or damage has been done to your door. Book a Service Call if you purchase a property with an older security door and need to have it assessed. Older products, even those in good working order, may not meet current Australian Standards. Book a Service Call From Bonds Security Products With more than 60 years experience, Bonds Security is your local expert for on-site security door maintenance. Our mobile teams can check your door and repair any problems so that you can be confident your property is secure. Contact us today to set up your Service Call.